It
doesn't matter whether you are on the track or on the dirt. Touch the
button and fast
becomes "hang on". You can add push-button horsepower quick and
simply with NOS Fogger™ kit. The fully adjustable Fogger™ lets
you choose how much is just right. With the jets included in each kit, you
can expect to see a 30% to 40% increase in horsepower and torque. Plus,
the Fogger™ can be adjusted for even more (or less) power by simply
changing the jets if your engine is modified.
Designed
for easy installation, each Fogger™ kit comes complete with everything
you need, including detailed, easy to follow instructions. All Fogger™
systems include a factory nitrous bottle (other sizes available), electric
fuel pump, nitrous and fuel solenoids, Fogger™ nozzles, filters,
fitting, tubing, distribution blocks or T-fittings, jets, switches, hose,
and all other hardware necessary for a complete installation. Please
contact the NOS Technical Support Department for jet recommendation before
you make any changes.
TThe
Fogger™ system requires a 12 volt DC power supply with a minimum of 12
amps available. For off-road applications you will need to make sure that
you have a power supply system that can supply 12 volt DC current with at
least 12 amps (or 150 watts) to the Fogger™ System. For further
information, please contact the NOS Technical Support Department.
All Kits Contain (accept 3008R): - Empty
10 oz. or 2lb. aluminum bottle
- Fuel
system injector pump
- Fogger
nozzles
- Horsepower
increases of 30% to 40%
- All
necessary mounting & installation hardware
-
Complete instructions & tuning tips
- Aircraft
quality nitrous feed line
3008
4
Cylinder 4-stroke over 700cc, 2 lb. bottle
3008-OZ
4
Cylinder 4-stroke over 700cc, 10 oz. bottle
3008R
4
Cylinder 4-stroke race kit, no bottle
3009
6
Cylinder motorcycles, 2 lb. bottle
3020
Turbocharged
Engines, 500-750cc, 2 lb. bottle
3021
Turbocharged
Engines, 750cc and over, 2 lb. bottle
** Pingel Dual Petcock Required (must be purchased separately).
1-0082
Billet
Aluminum Distribution Block-faces all the lines forward toward the fogger
nozzles, dual inlet ports for both nitrous and fuel. Solenoids can
be screwed directly to the block or remote mounted.
The
2 lb. bottle kits are supplied with a steel bracket for the bottle and a
steel clamp for the fuel regulator. The 10 oz. bottle kit comes with a
steel clamp for the fuel regulator and requires clamps for the bottle.
Optional
steel and aluminum bottle brackets and billet aluminum fuel pump brackets
are available.
