The DYNA 4000
Super Pro is the next generation drag race ignition for
motorcycles. The Super Pro is a refinement of the venerable
DYNA 4000 Pro, The Super Pro maintains all the excellent
features of the DYNA 4000 Pro with the following
enhancements: substantially increased electrical noise
immunity, improved wire harnessing to insure bullet-proof
operation under all conditions and they are all compatible
with the new DYNA Remote Display. The DYNA 4000
Super Pro Ignition is a high energy inductive ignition
designed to meet the needs of the professional drag racer.
The DYNA 4000 includes a built-in two stage rev limiter that
is used for launch control and over rev protection. The best
ignition imaginable for a high rpm, high horsepower engine
would have a long spark duration and deliver high spark
energy. This is exactly what the DYNA 4000 has been designed
to accomplish. By using specially designed coils, and
special microprocessor based control circuitry to manage the
high currents that these coils draw, the DYNA 4000 can
deliver four times the spark energy of the most popular CD
booster all the way up to 17,000 rpm! These high energy
sparks also have the desirable long duration characteristics
of inductive ignitions. This translates directly into better
engine performance across the board. The DYNA 4000
is not only a powerful ignition system, but also the
smoothest two stage rev limiter available. The DYNA 4000 has
a programmable launch limiter activated by a clutch switch
to help maintain consistency at the starting line. A
programmable over rev limiter is also implemented to prevent
engine damage due to drive line breakage or missed shifts.
The DYNA 4000 launch system is the choice of world champion
drag racers due to its rock steady limiting characteristics.
Other popular launch limiters cause engine harming banging
and popping due to their unsteady limiting. The DYNA 4000
holds the rpm to a perfectly steady and smooth limit while
preparing to launch.
Features:
The Dyna
4000 Super Pro uses the Dyna Pro Series Crank Trigger as
a pickup. It is simply connected between the trigger and
the ignition coils.
The Dyna
4000 Super Pro automatically shuts off when the engine
is not running, even if the ignition power is left on.
This prevents battery drain and coil overheating.
Has built
in diagnostic circuitry and an indicator LED that can be
used to static time the motor.
The Dyna
4000 Super Pro must be used with Dyna DC9-1, DC9-2, or
DC9-4 coils for proper operation.
Available
both as a dual output unit for single plug per cylinder
engines and as a quad output unit for dual plug per
cylinder engines.
Available
for both in line four cylinder and Harley Davidson
engines.
Housed in
an easily mounted case, 6” x 3-3/4” x 1-1/4”.
Part No.
Description
DPK4-HD1DF
H-D single plug, dual fire. Kit
Includes: Dual Fire DP4000-HD1S module,
one DC9-1coil, DW800 Spark plug wires
DPK4-HD1SF
H-D single plug, single fire. Kit
Includes: Single Fire DP4000-HD1S module,
two DC9-4 coils, DW800 Spark plug wires
