1. TOP TUBE LENGTH - use
a tape measure and measure from the top tube mounting hole
back to your desired length (remember, the wheelie bar
wheels will be off the ground approximately 2”).
TOP TUBE MOUNTING HOLE DIAMETER our standard is 3/8”
with counter-bored end. If mounting in a channel, give the
channel width dimension.
2. BOTTOM TUBE LENGTH - use a 2nd tape measure to
measure from the bottom tube mounting hole back to your top
tube length dimension on 1st tape measure. |
|
3. MOUNTING WIDTH - if
you have mounting tabs, measure from outside of the left tab
to outside of the right tab. If you have a mounting channel,
measure from the inside of the left channel to the inside of
the right channel and also channel width.
4. TOP TUBE MOUNTING TO
BOTTOM TUBE MOUNTING DISTANCE - measure from the top
tube mounting hole to the bottom tube mounting hole. |
